木质素基碳量子点的制备及其在Fe3+检测中的应用

doi:10.3969/j.issn.0253-2417.2018.05.005

林产化学与工业 ›› 2018, Vol. 38 ›› Issue (5): 30-36.doi: 10.3969/j.issn.0253-2417.2018.05.005

木质素基碳量子点的制备及其在Fe³⁺检测中的应用

高学霞^1,2, 周希^1,2, 刘美红^1,2, 王春鹏^1,2, 储富祥^1,2

1. 中国林业科学研究院林业新技术研究所, 北京 100091;
2. 中国林业科学研究院林产化学工业研究所;生物质化学利用国家工程实验室;国家林业局林产化学工程重点开放性实验室;江苏省生物质能源与材料重点实验室, 江苏南京 210042

收稿日期:2018-06-05 出版日期:2018-10-25 发布日期:2018-11-06
通讯作者: 周希,助理研究员,研究方向为生物基功能材料;E-mail:zhouxi1123nju@foxmail.com。 E-mail:zhouxi1123nju@foxmail.com
作者简介:高学霞(1992-),女,山东滨州人,硕士生,主要从事高分子材料研究
基金资助:
中国林科院中央级公益性科研院所基本科研业务费专项资金（CAFYBB2017SY033）

Preparation of Lignin Based Carbon Quantum Dots and Their Application in Fe³⁺ Detection

GAO Xuexia^1,2, ZHOU Xi^1,2, LIU Meihong^1,2, WANG Chunpeng^1,2, CHU Fuxiang^1,2

1. Research Institute of Forestry New Technology, CAF, Beijing 100091, China;
2. Institute of Chemical Industry of Forest Products, CAF;National Engineering Lab. for Biomass Chemical Utilization;Key and Open Lab. of Forest Chemical Engineering, SFA;Key Lab. of Biomass Energy and Material, Jiangsu Province, Nanjing 210042, China

Received:2018-06-05 Online:2018-10-25 Published:2018-11-06

摘要/Abstract

摘要： 以碱木质素为原料，在强酸环境中进行氧化水热反应制备碳量子点（CQDs），并对合成条件进行优化，结果显示：最优的合成条件为碱木质素用量1.3g，反应温度180℃，反应时间12h，NaBH₄用量1.3g。采用透射电镜（TEM）及激光粒度分析（DLS）对CQDs形貌及尺寸进行表征，显示CQDs具有较好的分散性，尺寸分布均匀，平均粒径约为3.5nm。采用红外光谱（FT-IR）及X射线光电子能谱（XPS）表征CQDs结构及组成元素，表明CQDs表面含有大量羰基、羧基等含氧官能团。此外，通过紫外-可见光谱（UV-vis），荧光光谱（FL）表征CQDs光学性质，其荧光量子产率达17.3%。以CQDs为探针，采用比色法将其用于Fe³⁺检测，结果表明：CQDs对Fe³⁺具有较好的选择性，在0~400μmol/L范围内溶液吸光度与Fe³⁺浓度呈线性关系（R²=0.995 4），检测限可达0.136μmol/L。同时，合成的CQDs表现出较低的细胞毒性，其在生物医药方面具有潜在应用价值。

关键词: 碳量子点, 荧光性能, 比色法, Fe³⁺检测

Abstract: Carbon quantum dots (CQDs) were prepared from alkali lignin by hydrothermal reaction in presence of strong acid, and the synthesis conditions were optimized.The results showed that the optimal synthesis conditions were the dosage of alkali lignin 1.3 g, reaction temperature 180℃, reaction time 12 h, the dosage of NaBH₄ 1.3 g. The morphology and size of CQDs were characterized by transmission electron microscopy (TEM) and laser particle size analysis (DLS). The results showed that CQDs had good dispersion and uniform size distribution, and the average particle size was about 3.5 nm. The structure and composition of CQDs were characterized by infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), which indicated that the surface of CQDs contained a large number of hydroxyl, carboxyl and other oxygen-containing functional groups. In addition, the optical properties of CQDs were characterized by ultraviolet visible spectroscopy (UV-vis) and fluorescence spectra(FL), and the fluorescence quantum yield was 17.3%. Using CQDs as probe, it was used to detect Fe³⁺ by colorimetric method. The results showed that CQDs had good selectivity to Fe³⁺, its detection range was 0-400 μmol/L, and the detection limit could reach 0.136 μmol/L. At the same time, the low cytotoxicity of the CQDs made them having potential applications in biological medicine.

Key words: carbon quantum dots, fluorescence properties, colorimetric method, detection of Fe³⁺

中图分类号:

TQ35

高学霞, 周希, 刘美红, 王春鹏, 储富祥. 木质素基碳量子点的制备及其在Fe³⁺检测中的应用[J]. 林产化学与工业, 2018, 38(5): 30-36.

GAO Xuexia, ZHOU Xi, LIU Meihong, WANG Chunpeng, CHU Fuxiang. Preparation of Lignin Based Carbon Quantum Dots and Their Application in Fe³⁺ Detection[J]. Chemistry and Industry of Forest Products, 2018, 38(5): 30-36.

参考文献

[1] BAKER S N,BAKER G A. Luminescent carbon nanodots:Emergent nanolights[J]. Angewandte Chemie-International Edition,2010,49(38):6726-6744.
[2] SUN X,TUO J Q,YANG W Y,et al. Facile synthesis of photoluminescent carbon quantum dots from biomass[J]. Nano Reports,2015,2:51-54.
[3] BHATT S,BHATT M,KUMAR A,et al. Green route for synthesis of multifunctional fluorescent carbon dots from Tulsi leaves and its application as Cr(VI) sensors,bio-imagingand patterning agents[J]. Colloids and Surfaces B:Biointerfaces,2018,167:126-133.
[4] SONG Y B,ZHU S J,YANG B. Bioimaging based on fluorescent carbon dots[J]. RSC Advances,2014,4:27184-27200.
[5] ZHAO A D,CHEN Z W,ZHAO C Q,et al. Recent advances in bioapplications of C-dots[J]. Carbon,2015,85:309-327.
[6] FENG T,AI X Z,AN G H,et al. Charge-convertible carbon dots for imaging-guided drug delivery with enhanced in vivo cancer therapeutic efficiency[J]. ACS Nano,2016,10(4):4410-4420.
[7] HOU Y X,LU Q J,WANG H Y,et al. One-pot electrochemical synthesis of carbon dots/TiO₂ nanocomposites with excellent visible light photocatalytic activity[J]. Materials Letters,2016,173:13-17.
[8] 孙晓丹,刘中群,颜昊. 石墨烯量子点的制备及其生物应用[J]. 无机化学学报,2016,31(4):337-344. SUN X D,LIU Z Q,YAN H. Preparation of graphene quantum dots and their biological applications[J]. Journal of Inorganic Chemistry,2016,31(4):337-344.
[9] SUN Y X,HE Z W,SUN X B,et al. Synthesis of water-soluble fluorescent carbon dots from a one-step hydrothermal method with potato[J]. Advanced Materials Research,2014,873:770-776.
[10] THAMBIRAJA S,SHANKARAN D R. Green synthesis of highly fluorescent carbon quantum dots from sugarcane bagasse pulp[J]. Applied Surface Science,2016,390:435-443.
[11] LIU S,TIAN J Q,WANG L,et al. Hydrothermal treatment of grass:A low-cost,green route to nitrogen-doped,carbon-rich,photoluminescent polymer nanodots as an effective fluorescent sensing platform for label-free detection of Cu(Ⅱ) ions[J]. Advanced Materials,2012,24(15):2037-2041.
[12] YUAN M,ZHONG R B,GAO H Y,et al. One-step,green and economic synthesis of water-soluble photoluminescent carbon dots by hydrothermal treatment of wheat straw and their bio-applications in labeling,imaging and sensing[J]. Applied Surface Science,2015,355:1136-1144.
[13] CHEN W X,HU C F,YANG Y H,et al. Rapid synthesis of carbon dots by hydrothermal treatment of lignin[J]. Materials,2016,9(3):184-191.
[14] NIU N,MA Z M,HE F,et al. Preparation of carbon dots for cellular imaging by molecular aggregation of cellulolytic enzyme lignin[J]. Langmuir:the ACS Journal of Surfaces & Colloids,2017,33(23):5786-5795.

木质素基碳量子点的制备及其在Fe³⁺检测中的应用

Preparation of Lignin Based Carbon Quantum Dots and Their Application in Fe³⁺ Detection

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

本文评价

关于本刊

投稿指南

在线期刊

相关单位

联系我们

[1]	杨艳, 任浩, 翟华敏. LiCl/DMSO溶剂体系中麦草溶解性能的评价方法[J]. 林产化学与工业, 2018, 38(4): 9-12.
[2]	郭璇, 莫文轩, 刘旭亮, 陈文焜, 李晓飞, 刘守新. 落叶松木粉水热炭化制备碳量子点及其性能研究[J]. 林产化学与工业, 2017, 37(1): 109-115.
[3]	高宏, 沈明贵, 王先凯, 宋湛谦, 商士斌. 脱氢枞酸二芳胺化合物的前线轨道能级研究[J]. 林产化学与工业, 2015, 35(5): 1-4.
[4]	刘贵华;张永康;肖美凤;彭新君. 纤维素酶解预处理法提取杜仲胶的工艺研究[J]. 林产化学与工业, 2010, 30(2): 77-82.
[5]	郑光耀;康宏兴;薄采颖;宋强;周维纯. 杨树芽提取物体外抗肿瘤活性的研究[J]. 林产化学与工业, 2009, 29(6): 38-42.
[6]	何志勇;夏文水. Folin-Ciocalteu比色法测定橄榄中多酚含量的研究[J]. 林产化学与工业, 2006, 26(04): 15-18.