欢迎访问《林产化学与工业》,

林产化学与工业 ›› 2017, Vol. 37 ›› Issue (4): 89-94.doi: 10.3969/j.issn.0253-2417.2017.04.013

• 研究报告 • 上一篇    下一篇

脱氢枞酸基甲基丙烯酸酯单体的合成和表征

刘少锋1, 卢传巍1, 王春鹏1,2, 储富祥1,2, 王基夫1,2   

  1. 1. 中国林业科学研究院 林产化学工业研究所;生物质化学利用国家工程实验室;国家林业局 林产化学工程重点开放性实验室;江苏省 生物质能源与材料重点实验室, 江苏 南京 210042;
    2. 中国林业科学研究院 林业新技术研究所, 北京 100091
  • 收稿日期:2016-10-24 出版日期:2017-08-25 发布日期:2017-09-02
  • 通讯作者: 王基夫,研究员,硕士生导师,从事生物质材料功能化研究;E-mail:wjf118@126.com E-mail:wjf118@126.com
  • 作者简介:刘少锋(1990-),男,河北石家庄人,硕士生,主要从事生物质材料研究工作
  • 基金资助:
    江苏省自然科学基金资助项目(BK20131070)

Synthesis and Characterization of 2-Methacryloyloxyisopro-panol Ester of Dehydroabietic Acid

LIU Shaofeng1, LU Chuanwei1, WANG Chunpeng1,2, CHU Fuxiang1,2, WANG Jifu1,2   

  1. 1. Institute of Chemical Industry of Forestry Products, CAF;National Engineering Lab. for Biomass Chemical Utilization;Key and Lab. of Forest Chemical Engineering, SFA;Key Lab. of Biomass Energy and Material, Jiangsu Province, Nanjing 210042, China;
    2. Research Institute of Forestry New Technology, CAF, Beijing 100091, China
  • Received:2016-10-24 Online:2017-08-25 Published:2017-09-02

摘要: 以脱氢枞酸(DA)和甲基丙烯酸缩水甘油酯(GMA)为原料,通过酯化反应合成了脱氢枞酸(2-甲基丙烯酰氧基异丙醇基)酯(DAGMA),探讨了反应时间、反应温度、催化剂种类及催化剂用量对合成DAGMA的影响,对DAGMA的结构和性能分别采用FT-IR、1H NMR、13C NMR、DSC、和GPC进行表征。研究结果表明:DAGMA较适合的合成条件为n(AD):n(GMA)1:1,以三乙胺作催化剂,用量为脱氢枞酸质量的2%,反应时间5 h,反应温度120℃,酯化率约为85%。DSC分析显示,在引发剂AIBN存在下,DAGMA可发生聚合反应,得到均聚物的重均相对分子质量(Mw)23 900,数均相对分质量(Mn)12 254,玻璃化转变温度(Tg)为62.61℃。

关键词: 脱氢枞酸, 甲基丙烯酸缩水甘油酯, 脱氢枞酸(2-甲基丙烯酰氧基异丙醇基)酯, 表征

Abstract: 2-Methacryloyloxyisopropanol ester of dehydroabietic acid (DAGMA) was synthesized by esterification of dehydroabietic acid and glycidyl methacrylate. The effects of reaction time, reaction temperature, amount and type of catalyst on the yield of dehydroabietic acid derived monomer were investigated. The resulting product was then characterized by FT-IR, 1H NMR, 13C NMR, DSC and GPC respectively. The results showed that the optimal conditions for the reaction were as follows:triethylamine as catalyst at an amount of 2% of dehydroabietic acid, reaction time 5 h, reaction temperature 120℃, and the esterification rate was about 85%. DSC test showed that in the presence of initiator AIBN, the suitable conditions for synthesis of DAGMA was n(DA):n(GMA) 1:1. It showed that DAGMA could be polymerized in the presence of initiator. The weight average molecular weight(Mw) of the asprepared homopolymer was 23 900, the number average molecular weight(Mn) was 12 254, and its glass transition temperature was around 62.61℃.

Key words: dehydroabietic acid, glycidyl methacrylate, 2-methacryloyloxyisopropanol ester of dehydroabietic acid, characterization

中图分类号: