[1] 程献宝,王小青,余雁,等. 纳米压痕技术在木质材料细胞壁力学研究中的应用[J]. 世界林业研究,2011,24(5): 40-46. CHENG Xian-bao,WANG Xiao-qing,YU Yan,et al.Application of nanoindentation technology in determing the mechanical properties of wood cell wall[J].World Forestry Research,2011,24(5):40-46.
[2] 俞昌铭.多孔材料传热传质及其数值分析[M].北京:清华大学出版社,2011. YU Chang-ming.Numerical Analysis of Heat and Mass Transfer for Porous Materials[M].Beijing:Tsinghua University Press,2011.
[3] 刘守新,张世润.生物质的快速热解[J].林产化学与工业,2004,24(3):95-101. LIU Shou-xin,ZHANG Shi-run.Review on fast pyrolysis of biomass for bio-oil[J].Chemistry and Industry of Forest Products,2004,24(3):95-101.
[4] CALLARD S,TALLARIDA G,BORGHESI A,et al.Thermal conductivity of SiO2 films by scanning thermal microscopy[J].Journal of Non-Crystalline Solids,1999,245(1):203-209.
[5] 郭富安,纪艳丽,TRANNOY N.钛合金表面等离子喷涂Y2O3稳定的ZrO2涂层的扫描热显微镜分析[J].中国有色金属学报,2007,17(2):277-282. GUO Fu-an,JI Yan-li,TRANNOY N.Thermal properties of plasma-sprayed yttria-stabilized zirconia thermal barrier coating on Ti-6Al-4V alloy analyzed by scanning thermal microscopy[J].The Chinese Journal of Nonferrous Metals,2007,17(2):277-282.
[6] KONNERTH J,HARPER D,LEE S,et al.Adhesive penetration of wood cell walls investigated by scanning thermal microscopy(SThM)[J].Holzforschung,2008,62(1):91-98.
[7] LEE S,WANG S,ENDO T,et al.Visualization of interfacial zones in lyocell fiber-reinforced polypropylene composite by AFM contrast imaging based on phase and thermal conductivity measurements[J].Holzforschung,2009,63(2):240-247.
[8] VAY O,OBERSRIEBNIG M,MVLLER U,et al.Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy(SThM)[J].Holzforschung,2013,67(2):155-159.
[9] MCCONNEY M E,SINGAMANENI S,TSUKRUK V V.Probing soft matter with the atomic force microscopies:Imaging and force spectroscopy[J].Polymer Reviews,2010,50(3):235-286.
[10] SPURR A R.A low-viscosity epoxy resin embedding medium for electron microscopy[J].Journal of Ultrastructure Research,1969,26(1):31-43.
[11] MENG Yue-jie,WANG Si-qun,CAI Zhi-yong,et al.A novel sample preparation method to avoid influence of embedding medium during nano-indentation[J].Applied Physics A,2013,110(2):361-369.
[12] 刘耀诚,周和平,乔梁.(YCa)F3助烧AIN陶瓷的显微结构和热导率[J].无机材料学报,2000,15(4):619-624. LIU Yao-cheng,ZHOU He-ping,QIAO Liang.Microstructure and thermal conductivity of aluminium nitride with(YCa)F3 as sintering aid[J].Journal of Inorganic Materials,2000,15(4):619-624.
[13] 徐有明.木材学[M].北京:中国林业出版社,2006:43-45. XU You-ming.Wood Science[M].Beijing:Chinese Forestry Press,2006:43-45.
[14] EITEKKBERGER J,HOFSTETTER K.Prediction of transport properties of wood below the fiber saturation point:A multiscale homogenization approach and its experimental validation[J].Composites Science and Technology,2011,71(2):134-144.
[15] 杨淑惠.植物纤维化学[M].北京:中国轻工业出版社,2001:50-55. YANG Shu-hui.Chemistry of Plant Fiber[M].Beijing:China Light Industry Press,2001:50-55.
[16] RUIZ F,SUN W,POLLAK F H,et al.Determination of the thermal conductivity of diamond-like nanocomposite films using a scanning thermal microscope[J].Applied Physics Letters,1998,73(13):1802-1804.
[17] PRICE D M,READING M,HAMMICHE A,et al.Micro-thermal analysis:Scanning thermal microscopy and localised thermal analysis[J].International Journal of Pharmaceutics,1999,192(1):85-96. |