[1] 回彩娟. 生物质燃料常温高压致密成型技术及成型机理研究[D]. 北京:北京林业大学硕士学位论文,2006. HUI C J. The studies of biomass solidifying technology and principle with high pressure on natural conditions for bio-fuel making[D]. Beijing:Master Degree Thesis of Beijing Forestry University,2006. [2] 贾敬敦,马隆龙,蒋丹平,等.生物质能源产业科技创新发展战略[M]. 北京:化学工业出版社,2014:103-122. JIA J D,MA L L,JIANG D P,et al. Development Strategy for the Science and Technology Innovation of Biomass Energy Industry[M]. Beijing:Chemical Industry Press,2014:103-122. [3] KALIYAN N,MOREY R V. Factors affecting strength and durability of densified biomass products[J]. Biomass and Bioenergy,2009,33(3):337-359. [4] 涂德浴,李安心,何贵生. 水稻秸秆与木屑混合原料热压成型试验[J]. 农业工程学报,2015,31(20):205-211. TU D Y,LI A X,HE G S. Hot pressing forming experiment of the rice straw and sawdust mixed material[J]. Transactions of the Chinese Society of Agricultural Engineering,2015,31(20):205-211. [5] STASIAK M,MOLENDA M,BAN'DA M,et al. Mechanical and combustion properties of sawdust:Straw pellets blended in different proportions[J]. Fuel Processing Technology,2017,156:366-375. [6] LIU Z J,LIU X E,FEI B H,et al. The properties of pellets from mixing bamboo and rice straw[J]. Renewable Energy,2013,55:1-5. [7] STAHL M,BERGHEL J. Energy efficient pilot-scale production of wood fuel pellets made from a raw material mix including sawdust and rapeseed cake[J]. Biomass and Bioenergy,2011,35(12):4849-4854. [8] LEE S M,AHN B J,CHOI D H,et al. Effects of densification variables on the durability of wood pellets fabricated with Larix kaempferi C. and Liriodendron tulipifera L. sawdust[J]. Biomass and Bioenergy,2013,48:1-9. [9] TUMULURU S. Effect of process variables on the density and durability of the pellets made from high moisture corn stover[J]. Biosystems Engineering,2014,119:44-57. [10] VAN DAM J E G,VAN DEN OEVER M J A,TEUNISSEN W,et al. Process for production of high density/high performance binderless boards from whole coconut husk.Part 1:Lignin as intrinsic thermosetting binder resin[J]. Industrial Crops and Products,2004,19(3):207-216. [11] CASTELLANO J M,GÓMEZ M,FERNÁNDEZ M,et al. Study on the effects of raw materials composition and pelletization conditions on the quality and properties of pellets obtained from different woody and non woody biomasses[J]. Fuel,2015,139:629-636. [12] HOLM J K,STELTE W,POSSELT D,et al. Optimization of a multiparameter model for biomass pelletization to investigate temperature dependence and to facilitate fast testing of pelletization behavior[J]. Energy & Fuels,2011,25(8):3706-3711. [13] BRADFIELD J,LEVI M P. Effect of species and wood to bark Ratio on pelleting of southern woods[J]. Forest Products Journal,1984,34(1):61-63. [14] 李伟振,姜洋,王功亮,等. 生物质压缩成型机理研究进展[J].可再生能源,2016,34(10):1525-1532. LI W Z,JIANG Y,WANG G L,et al. Progress in research of biomass molding mechanism[J]. Renewable Energy Resources,2016,34(10):1525-1532. [15] 王功亮,姜洋,李伟振,等.基于响应面法的玉米秸秆成型工艺优化[J]. 农业工程学报,2016,32(13):223-227. WANG G L,JIANG Y,LI W Z,et al. Process optimization of corn stover compression molding experiments based on response surface method[J]. Transactions of the Chinese Society of Agricultural Engineering,2016,32(13):223-227. [16] OBERNBERGER I,THEK G. Physical characterisation and chemical composition of densified biomass fuels with regard to their combustion behaviour[J]. Biomass and Bioenergy,2004,27(6):653-669. [17] KALIYAN N,MOREY R V. Densification characteristics of corn stover and switchgrass[J]. Transactions of the Asabe,2009,52(3):907-920. [18] 田潇瑜,侯振东,徐杨. 玉米秸秆成型块微观结构研究[J]. 农业机械学报,2011,42(3):105-108. TIAN X Y,HOU Z D,XU Y. Microstructure of corn stover briquette[J]. Transactions of the Chinese Society of Agricultural Machinery,2011,42(3):105-108. [19] STELTE W,HOLM J K,SANADI A R,et al. A study of bonding and failure mechanisms in fuel pellets from different biomass resources[J]. Biomass and Bioenergy,2011,35(2):910-918. [20] LISPERGUER J,PEREZ P,URIZAR S. Structure and thermal properties of lignins:Characterization by infrared spectroscopy and differential scanning calorimetry[J]. Journal of the Chilean Chemical Society,2009,54(4):460-463. [21] LIU Z J,JIANG Z H,CAI Z Y,et al. Dynamic mechanical thermal analysis of moso bamboo(Phyllostachys heterocycla) at different moisture content[J]. Bioresources,2012,7(2):1548-1557. [22] 张百良,任天宝,徐桂转,等. 中国固体生物质成型燃料标准体系[J]. 农业工程学报,2010,26(2):257-262. ZHANG B L,REN T B,XU G Z,et al. Solid biofuel standard system in China[J]. Transactions of the Chinese Society of Agricultural Engineering,2010,26(2):257-262. [23] GARCÍA-MARAVER A,POPOV V,ZAMORANO M. A review of European standards for pellet quality[J]. Renewable Energy,2011,36(12):3537-3540. [24] 赵立欣,田宜水,孟海波,等. NY/T 1883-2010生物质固体成型燃料成型设备试验方法[S]. 北京:中国标准出版社. ZHAO L X,TIAN Y S,MENG H B,et al.NY/T 1883-2010 Testing method for densified biofuel molding equipment[S]. Beijing:China Standard Press. [25] 赵立欣,田宜水,孟海波,等. NY/T 1881.7-2010生物质固体成型燃料试验方法,第7部分:密度[S]. 北京:中国标准出版社. ZHAO L X,TIAN Y S,MENG H B,et al.NY/T 1881.7-2010 Densified biofuel-test method part 7 particle density[S]. Beijing:China Standard Press. [26] 赵立欣,田宜水,孟海波,等. NY/T 1881.8-2010生物质固体成型燃料试验方法,第8部分:机械耐久性[S]. 北京:中国标准出版社. ZHAO L X,TIAN Y S,MENG H B,et al.NY/T 1881.8-2010 Densified biofuel-test method part 8 mechanical durability[S]. Beijing:China Standard Press. [27] STELTE W,HOLM J K,SANADI A R,et al. Fuel pellets from biomass:The importance of the pelletizing pressure and its dependency on the processing conditions[J]. Fuel,2011,90(11):3285-3290. [28] KALIYAN N,MOREY R V. Natural binders and solid bridge type binding mechanisms in briquettes and pellets made from corn stover and switchgrass[J]. Bioresource Technology,2010,101(3):1082-1090. |