1 |
AUVERGNE R , CAILLOL S , DAVID G , et al. Biobased thermosetting epoxy:Present and future[J]. Chemical Reviews, 2013, 114 (2): 1082- 1115.
|
2 |
JIN F L, LI X, PARK S J, et al.Synthesis and application of epoxy resins:A review[J/OL]. Journal of Industrial and Engineering Chemistry, 2015, 29:1-11[2020-01-13].http://dx.doi.org/10.1016/j.jiec.2015.03.026.
|
3 |
KARUMURI S , HIZIROGLU S , KALKAN A K , et al. Thermoset-cross-linked lignocellulose:A moldable plant biomass[J]. ACS Applied Materials & Interfaces, 2015, 7 (12): 6596- 6604.
|
4 |
SAHOOS K , MOHANTY S , NAYAK S K , et al. Toughened bio-based epoxy blend network modified with transesterified epoxidized soybean oil:Synthesis and characterization[J]. RSC Advances, 2015, 5 (18): 13674- 13691.
|
5 |
WANG X , WANG D Y , et al. Renewable cardanol-based surfactant modified layered double hydroxide as a flame retardant for epoxy resin[J]. ACS Sustainable Chemistry & Engineering, 2015, 3 (12): 3281- 3290.
|
6 |
MA S , LI T , LIU X , et al. Research progress on bio-based thermosetting resins[J]. Polymer International, 2016, 65 (2): 164- 173.
|
7 |
李娟. 生物质环氧树脂固化剂的研究进展[J]. 中国胶粘剂, 2018, 27 (11): 58- 62.
|
|
LI J . Research progress in the biomass curing agents for epoxy resins[J]. China Adhesives, 2018, 27 (11): 58- 62.
|
8 |
LIU X , XIN W , ZHANG J , et al. Rosin-derived imide-diacids as epoxy curing agents for enhanced performance[J]. Bioresource Technology, 2010, 101 (7): 2520- 2524.
|
9 |
SUN J , WANG C , STUBBS L P , et al. Carboxylated lignin as an effective cohardener for enhancing strength and toughness of epoxy[J]. Macromolecular Materials and Engineering, 2017, 302 (12): 1- 8.
|
10 |
CHEN Y , XI Z , ZHAO L , et al. New bio-based polymeric thermosets synthesized by ring-opening polymerization of epoxidized soybean oil with a green curing agent[J]. European Polymer Journal, 2016, 84, 435- 447.
|
11 |
田银彩, 杨倩. 凝固剂对玉米淀粉/棉纤维素薄膜降解性能的影响[J]. 塑料工业, 2019, 47 (8): 124- 127,137.
|
|
TIAN Y C , YANG Q . Effect of coagulant on degradation performance of corn starch/cotton cellulose film[J]. Plastics Industry, 2019, 47 (8): 124- 127,137.
|
12 |
张德健, 方志强, 刘宇, 等. PET纤维增强纳米纤维素薄膜撕裂性能的研究[J]. 造纸科学与技术, 2019, 38 (4): 21- 26.
|
|
ZHANG D J , FANG Z Q , LIU Y , et al. Study on tear properties of PET fiber reinforced nanocellulose film[J]. Paper Science and Technology, 2019, 38 (4): 21- 26.
|
13 |
朱朋辉, 陈港, 欧华杰, 等. 纳米纤维素/碳纳米管复合薄膜的制备及湿敏性能[J]. 华南理工大学学报(自然科学版), 2019, 47 (8): 129- 135.
|
|
ZHU P H , CHEN G , OU H J , et al. Preparation and humidity sensitivity of nanocellulose/carbon nanotube composite films[J]. Journal of South China University of Technology(Natural Science Edition), 2019, 47 (8): 129- 135.
|
14 |
谭温珍.再生纤维素基复合薄膜的制备及阻隔性研究[D].西安:西安理工大学, 2019.
|
|
TAN W Z.Preparation and barrier properties of regenerated cellulose-based composite films[D]. Xi'an: Xi'an University of Technology, 2019.
|
15 |
WANG J , CHEN Y P , YAO K , et al. Robust antimicrobial compounds and polymers derived from natural resin acids[J]. Chemical Communications, 2012, 48 (6): 916- 918.
|
16 |
朱金.环氧大豆油基聚合物的合成及性能研究[D].南京:南京林业大学, 2014.
|
|
ZHU J.Synthesis and properties of epoxy soybean oil based polymer[D]. Nanjing: Nanjing Forestry University, 2014.
|