TEMPO/NaBr/NaClO氧化对纳米微晶纤维素性能的影响

doi:10.3969/j.issn.0253-2417.2015.02.005

林产化学与工业 ›› 2015, Vol. 35 ›› Issue (2): 31-37.doi: 10.3969/j.issn.0253-2417.2015.02.005

TEMPO/NaBr/NaClO氧化对纳米微晶纤维素性能的影响

姚文润¹, 徐清华^1,2, 靳丽强¹, 程正亮¹, 高扬¹

1. 齐鲁工业大学造纸科学与技术教育部重点实验室, 山东济南 250353;
2. 陕西科技大学陕西省造纸技术及特种纸品开发重点实验室, 陕西西安 710021

收稿日期:2014-03-24 出版日期:2015-04-25 发布日期:2015-04-24
通讯作者: 徐清华,教授,硕士生导师,研究领域:木质纤维资源化利用;E-mail:xu-qinghua@163.com。 E-mail:xu-qinghua@163.com
作者简介:姚文润(1991-),女,山东菏泽人,硕士生,主要从事纳米纤维素制备及应用的研究工作
基金资助:
国家自然科学基金资助项目(31370581);山东省科技发展计划资助项目(13fz02)

Effects of TEMPO/NaBr/NaClO-oxidation of Nanocrystalline Cellulose on Its Properties

YAO Wen-run¹, XU Qing-hua^1,2, JIN Li-qiang¹, CHENG Zheng-liang¹, GAO Yang¹

1. Key Laboratory of Paper Science & Technology of Ministry of Education, Qilu University of Technology, Jinan 250353, China;
2. Shaanxi Province of Key Lab of Paper Technology and Specialty Paper, Shaanxi University of Science & Technology, Xi'an 710021, China

Received:2014-03-24 Online:2015-04-25 Published:2015-04-24

摘要/Abstract

摘要： 利用TEMPO/NaBr/NaClO体系对硫酸水解漂白硫酸盐浆制备的纳米微晶纤维素(NCC)进行改性制备氧化NCC (TONCC)。采用电导滴定、X射线衍射(XRD)及原子力显微镜(AFM)对改性前后纳米微晶纤维素的表面性能及形貌进行表征,并将其作为造纸增强剂应用于废新闻纸脱墨浆,研究其对浆料强度性能的改善作用。结果表明,TONCC表面引入大量的羧基(0.806 mmol/g),而NCC表面羧基含量仅为0.02 mmol/g,外观由半透明变为透明。TONCC保持了纤维素I的晶型结构,分散性能得到改善,宽度略有减小。将改性前后的纳米微晶纤维素加入到废新闻纸脱墨浆中,与对照样相比,当NCC和TONCC用量为0.6%时,浆料的抗张指数分别提高了8.7%和14.2%;NCC和TONCC用量为0.8%时,撕裂指数提高了约12%。将NCC和TONCC与CPAM联合使用,浆料的抗张指数得到了进一步提升,用量为0.8%时,抗张指数分别为17.35和18.52(N·m)/g,分别比对照样提高了19.6%和27.7%。

关键词: 纳米微晶纤维素, TEMPO/NaBr/NaClO氧化, 废新闻纸浆, 增强

Abstract: Nanocrystalline cellulose (NCC) prepared by the acid-extraction of bleached hardwood kraft pulp (BHKP), was oxidized by using TEMPO/NaBr/NaClO at pH 10 to prepare TEMPO-oxidized NCC (TONCC). The properties of NCC before and after oxidation were characterized by conductimetric titration, X-ray diffraction (XRD), and atomic force microscopy (AFM). The resulting product was then applied in the deinked pulp, and its improvement in pulp strength was evaluated. It was found that TONCC maintained the crystalline form of cellulose I, and showed better dispersibility, smaller dimension and higher level of carboxyl content compared with NCC. With the addition of NCC and TONCC to the deinked pulp respectively, the tearing and tensile indexes increased while they were compared with that of the control. When the addition of NCC and TONCC was 0.6%, the tensile indexes were increased by 8.7% and 14.2%, respectively. When NCC and TONCC samples were applied together with cationic polyacrylamide (CPAM), tensile indexes of the deinked pulp were increased by 19.6% and 27.7%, respectively, in comparison with that of the control.

Key words: nanocrystalline cellulose, TEMPO/NaBr/NaClO-oxidation, deinked pulp, strength improvement

中图分类号:

TQ35
TS75

姚文润, 徐清华, 靳丽强, 程正亮, 高扬. TEMPO/NaBr/NaClO氧化对纳米微晶纤维素性能的影响[J]. 林产化学与工业, 2015, 35(2): 31-37.

YAO Wen-run, XU Qing-hua, JIN Li-qiang, CHENG Zheng-liang, GAO Yang. Effects of TEMPO/NaBr/NaClO-oxidation of Nanocrystalline Cellulose on Its Properties[J]. Chemistry and Industry of Forest Products, 2015, 35(2): 31-37.

参考文献

[1] HAMAD W.On the development and applications of cellulosic nanofibrillar and nanocrystalline materials[J].The Canadian Journal of Chemical Engineering, 2006, 84(5):513-519.
[2] JOHN M J, THOMAS S.Biofibers and biocomposites[J].Carbohydrate Polymers, 2008, 71(3):343-364.
[3] WEGNER T H, JONES P E.Advancing cellulose-based nanotechnology[J].Cellulose, 2006, 13(2):115-118.
[4] FUJISAWA S, OKITA Y, FUKUZUMI H, et al.Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups[J].Carbohydrate Polymers, 2011, 84(1):579-583.
[5] WANG Qi-jun, ZHU Sheng-dong.Genetically modified lignocellulosic biomass for improvement of ethanol production[J].Bioresources, 2010, 5(1):60-70.
[6] 刘延峰, 邱广俊, 王春东, 等.造纸增强剂的应用现状及研究进展[J].广州化工, 2008, 36(5):24-26. LIU Yan-feng, QIU Guang-jun, WANG Chun-dong, et al.Application and research progress on paper strengthening agent[J].Guangzhou Chemical Industry, 2008, 36(5):24-26.
[7] TURBAK A F, SNYDER F W, SANDBERG K R.Microfibrillated cellulose, a new cellulose product:Properties, uses, and commercial potential[J].Journal of Applied Polymer Science, 1983, 28(1):815-827.
[8] AHOLA S, ÖSTERBERG M, LAINE J.Cellulose nanofibrils adsorption with poly (amide-amine) epichlorohydrin studied by QCM-D and application as a paper strength additive[J].Cellulose, 2008, 15(2):3031314.
[9] HENRIKSSON M, BERGLUND L A, ISAKSSON P, et al.Cellulose nanopaper structures of high toughness[J].Biomacromolecules, 2008, 9(6):1579-1585.
[10] XU Qing-hua, GAO Yang, QIN Meng-hua, et al.Nanocrystalline cellulose from aspen kraft pulp and its application in deinked pulp[J].International Journal of Biological Macromolecules, 2013, 60:241-247.
[11] MISSOUM K, MARTOA F, BELGACEM M N, et al.Effect of chemically modified nanofibrillated cellulose addition on the properties of fiber-based materials[J].Industry Crops & Products, 2013, 48:98-105.
[12] RATTAZ A, MISHRA S P, CHABOT B, et al.Cellulose nanofibres by sonocatalysed-TEMPO-oxidation[J].Cellulose, 2011, 18(3):585-593.
[13] LU Ping, HSIEH Y L.Preparation and characterization of cellulose nanocrystals from rice straw[J].Carbohydrate Polymers, 2012, 87(1):564-573.
[14] HABIBI Y, CHANZY H, VIGNON M R.TEMPO-mediated surface oxidation of cellulose whiskers[J].Cellulose, 2006, 13(6):679-687.
[15] DA SILVA P D, MONTANARI S, VIGNON M R.TEMPO-mediated oxidation of cellulose III[J].Biomacromolecules, 2003, 4(5):1417-1425.
[16] 马晓娟, 黄六莲, 陈礼辉, 等.纤维素结晶度的测定方法[J].造纸科学与技术, 2012, 31(2):75-78. MA Xiao-juan, HUANG Liu-lian, CHEN Li-hui, et al.Determination methods for crystallinity of cellulose[J].Paper Science & Technology, 2012, 31(2):75-78.
[17] ISOGAI A, SAITO T, FUKUZUMI H.TEMPO-oxidized cellulose nanofibers[J].Nanoscale, 2011, 3(1):71-85.
[18] DE NOOY A E J, BESEMER A C, VAN BEKKUM H.Highly selective tempo mediated oxidation of primary alcohol groups in polysaccharides[J].Recueil des Travaux Chimiques des Pays-Bas, 1994, 113(3):165-166.
[19] KLEMM D, HEUBLEIN B, FINK H P.Cellulose:Fascinating biopolymer and sustainable raw material[J].Angewandte Chemie International Edition, 2005, 44(22):3358-3393.
[20] JOHNSON R K, ZINK-SHARP A, RENNECKAR S H, et al.A new bio-based nanocomposite:Fibrillated TEMPO-oxidized celluloses in hydroxypropylcellulose matrix[J].Cellulose, 2009, 16(2):227-238.
[21] 石淑兰, 何福望.制浆造纸分析与检测[M].北京:中国轻工业出版社, 2008. SHI Shu-lan, HE Fu-wang.Analysis and Test of Pulping and Papermaking[M].Beijing:China Light Industry Press, 2008.
[22] XU Qing-hua, LI Wei-gong, CHENG Zheng-liang, et al.TEMPO/NaBr/NaClO-mediated surface oxidation of the nanocrystalline cellulose and its microparticulate retention system with cationic polyacrylamide[J].Bioresources, 2014, 9(1):994-1006.
[23] JOSELEAU J P, CHEVALIER-BILLOSTA V, RUEL K.Interaction between microfibrillar cellulose fines and fibers:Influence on pulp qualities and paper sheet properties[J].Cellulose, 2012, 19(3):769-777.

TEMPO/NaBr/NaClO氧化对纳米微晶纤维素性能的影响

Effects of TEMPO/NaBr/NaClO-oxidation of Nanocrystalline Cellulose on Its Properties

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价

关于本刊

投稿指南

在线期刊

相关单位

联系我们

[1]	尹文章, 李建强, 许正茂, 张春辉. 低品质纤维制备微纤化纤维素的研究[J]. 林产化学与工业, 2019, 39(2): 89-95.
[2]	李晶晶, 宋湛谦, 李大纲, 商士斌, 郭勇. 纳米纤维素增强木塑复合材料的性能研究[J]. 林产化学与工业, 2015, 35(5): 15-21.
[3]	王钱钱, 朱倩倩, 孙建中, 刘玉, 詹怀宇. 纳米纤维素的形貌及快速表征方法的比较[J]. 林产化学与工业, 2014, 34(6): 49-55.
[4]	马晓军;刘辛燕. 基于FT-IR的木质碳纤维原丝固化增强机理的研究[J]. 林产化学与工业, 2012, 32(5): 19-23.
[5]	郑斐;石翛然;吴咪佳;汪晶;丁少军. 一种包含双纤维素结合域的新型生物纸张增强剂[J]. 林产化学与工业, 2010, 30(3): 61-65.
[6]	刘玉新;胡惠仁;黄驰. 阳离子半纤维素的制备及对纸张的增强作用研究[J]. 林产化学与工业, 2009, 29(2): 95-99.
[7]	郭瑞;丁恩勇;. K-卡拉胶与纳米微晶纤维素凝胶化的研究[J]. 林产化学与工业, 2007, 27(2): 120-122.
[8]	李建文;邱化玉;詹怀宇. 阳离子聚丙烯酰胺乳液对木浆增强作用的研究[J]. 林产化学与工业, 2006, 26(1): 79-82.
[9]	任俊莉;邱化玉;孙润仓. 明胶接枝共聚物乳液的合成及其对纸张强度的影响[J]. 林产化学与工业, 2006, 26(1): 99-103,.
[10]	郭瑞;丁恩勇. 纳米微晶纤维素的黏度行为和谱学特征[J]. 林产化学与工业, 2006, 26(04): 54-56.