欢迎访问《林产化学与工业》,

林产化学与工业 ›› 2008, Vol. 28 ›› Issue (3): 1-6.

• 论文 •    下一篇

负载型纳米非晶合金NiB/MCM-41催化松香加氢反应性能研究

吕志果1, 宋湛谦2, 郭振美1, 陈燕1, 于世涛1   

  1. 1. 青岛科技大学, 山东省天然资源化学利用工程技术研究中心, 山东, 青岛, 266042;2. 中国林业科学研究院, 林产化学工业研究所;国家林业局, 林产化学工程重点开放性实验室, 江苏, 南京, 210042
  • 收稿日期:2007-12-03 修回日期:1900-01-01 出版日期:2008-06-30 发布日期:2008-06-30

Catalytical Performance of Supported Nano-amorphous Alloy NiB/MCM-41 on Hydrogenation of Rosin

LV Zhi-guo1, SONG Zhan-qian2, GUO Zhen-mei1, CHEN Yan1, YU Shi-tao1   

  1. 1. Utilization Center of Natural Products in Shandong Province, Qingdao University of Science & Technology, Qingdao 266042, China;2. Institute of Chemical Industry of Forest Products, CAF;Key and Open Lab. on Forest Chemical Engineering, SFA, Nanjing 210042, China
  • Received:2007-12-03 Revised:1900-01-01 Online:2008-06-30 Published:2008-06-30

摘要: 将采用化学还原沉积法制备的负载型非晶合金NiB/MCM-41中孔分子筛催化剂用于松香的氢化反应,表现出很高的加氢催化活性.研究确定在Ni负载量为13%~15%、反应温度180~190℃、反应压力7~9 MPa条件下加氢反应5 h,去氢枞酸(DEHAA)、枞酸(AA)在加氢产物中的含量分别小于2.5%和0.5%,且在催化剂重复使用过程中加氢产物分布基本保持稳定.分别采用XRD、TEM、EDAX、ICP和比表面测定等手段对催化剂进行了表征.研究表明:NiB活性组分具有非晶结构特征、催化剂具有典型的中孔结构和较大的比表面积.

关键词: 松香加氢, 负载型非晶态合金催化剂, 中孔分子筛

Abstract: Hydrogenation of rosin catalyzed by supported nano-amorphous alloy NiB/MCM-41 prepared by chemical reductive deposition method was investigated. The catalyst showed excellent catalytic activity for hydrogenation of rosin. Under the optimum conditions for hydrogenation of rosin i.e. load volume of Ni 180-190℃, reaction time 5 h, the contents of dehydroabietic acid(DEHAA) and abietic acid (AA) in the product were less than 2.5% and 0.5% respectively. The distribution of hydrogenation products remained basically stable during the repeated using of the catalyst. The amorphous alloy structure of NiB active sites, typical mesoporous structure and high BET area in the prepared catalyst had been proved by XRD,TEM,EOAX,ICP and N2 adsorption-desorption.

Key words: [WTHZ]Key words: [WTBZ]rosin hydrogenation, supported amorphous alloy catalyst, mesoporous molecular sieves

中图分类号: