渗透剂对桉木化学机械法制浆性能的影响

doi:10.3969/j.issn.0253-2417.2016.03.004

Chemistry and Industry of Forest Products ›› 2016, Vol. 36 ›› Issue (3): 23-28.doi: 10.3969/j.issn.0253-2417.2016.03.004

Previous Articles Next Articles

Effects of Penetrating Agent on Properties of Eucalyptus Woodchips Chemi-mechanical Pulping

DENG Yong-jun^1,2,1, FANG Gui-gan¹, HAN Shan-ming¹, JIAO Jian¹, LI Hong-bin¹, LIANG Fang-min¹, LIN Yan¹

1. Institute of Chemical Industry of Forest Products, CAF;National Engineering Lab. for Biomass Chemical Utilization;Key and Open Lab. of Forest Chemical Engineering, SFA;Key Lab. of Biomass Energy and Material, Jiangsu Province, Nanjing 210042, China;
2. Research Institute of Forestry New Technology, CAF, Beijing 100091, China

Received:2015-05-26 Online:2016-06-25 Published:2016-07-07

Abstract

Abstract: The effects of penetrating agent on the properties of eucalyptus woodchips chemi-mechanical pulping were studied. The results showed that the performances of different type of penetrants were quite different in the eucalyptus woodchips chemi-mechanical pulping properties. Among these, sodium diethylhexyl sulfosuccinate penetrant exhibited the best performance on improving the impregnation of eucalyptus woodchips. With the dosage of penetrant of 0.4%, the chemical liquor absorption amount and NaOH absorption rate of wood chips respectively increased by 7.34% and 9.97% respectively, if they were compared with the blank groups. At the Canadian standard freeness (CSF) level of 300 mL, with the addition of 0.4% sodium diethylhexyl sulfosuccinate at the impregnation stage, the refining energy consumption and shives content in pulp were reduced by over 9% and 46%, respectively, if they were compared to the control pulp sample. And the tensile strength, burst strength and tear strength were increased by 11.4%, 14.3% and 15.6%, respectively, without losing brightness.

Key words: penetrant, eucalyptus woodchip, pulping properties, chemi-mechanical pulping

CLC Number:

TQ35

DENG Yong-jun, FANG Gui-gan, HAN Shan-ming, JIAO Jian, LI Hong-bin, LIANG Fang-min, LIN Yan, LIANG Long. Effects of Penetrating Agent on Properties of Eucalyptus Woodchips Chemi-mechanical Pulping[J]. Chemistry and Industry of Forest Products, 2016, 36(3): 23-28.

References

[1] 林友峰,房桂干,杨淑惠,等.制浆过程中木片浸渍机理及改善措施[J].中国造纸, 2007,26(2):50-55. LIN You-feng,FANG Gui-gan,YANG Shu-hui,et al.Impregnating mechanism of wood chip and the methods used to enhance impregnation in the pulping[J].China Pulp & Paper,2007,26(2):50-55.
[2] 徐永建,敬玲梅,吴养育,等.渗透剂及搓磨分丝对棉秆高得率浆成纸性能的作用[J].纸和造纸,2010,29(8):21-24. XU Yong-jian,JING Ling-mei,WU Yang-yu,et al.Effect of osmotic reagent and dynamic extruding on the properties of high yield cotton stalk pulp[J].Paper and Paper Making,2010,29(8):21-24.
[3] 田超,陈彬,吕卫军.渗透剂在CTMP制浆过程化学预浸渍段的应用初探[J].中国造纸,2011,30(5):11-15. TIAN Chao,CHEN Bin,LV Wei-jun.Preliminary study on the application of penetrant in preimpregnation stage of CTMP production[J].China Pulp & Paper,2011,30(5):11-15.
[4] DORLAND R M,LEASK R A,MCKINNEY J W.Laboratory studies in sulphite pulping:The effect of species,base and liquor penetration[J].Pulp and Paper Magazine of Canada,1957,58(5):135-145.
[5] LEATHAM G F,MYERS G C,AND WEGNER T H.Biomechanical pulping of aspen chips:Energy savings resulting from different fungal treatments[J].Tappi Journal,1990,73(5):197-200.
[6] ANA G,JOSEC D R,MARIA J M,et al.Fungal degradation of lipophilic extractives in eucalyptus globulus wood[J].Applied and Environmental Microbiology,1999,65(4):1367-1371.
[7] TODD A B,ROBERT A B,ROBERTA L.Bacterial biodegradation of extractives and patterns of bordered pit membrane attack in pine wood[J].Applied and Environmental Microbiology,2000,66(12):5201-5205.
[8] PENG F,FERRITSIUS R,ANGSAS U.Mechanical pulping with pectinase pretreatment of wood chips[J].International Mechanical Pulping Conference,2003:335-340.
[9] JACOBS-YOUNG C J,VENDITTI R A,JOYCE T W.Effect of enzymatic pretreatment on the diffusion of sodium hydroxide in wood[J].Tappi Journal,1998,81(1):260-266.

Effects of Penetrating Agent on Properties of Eucalyptus Woodchips Chemi-mechanical Pulping

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 2

Recommended Articles

Metrics

Comments

[1]	DENG Yong-jun, FANG Gui-gan, HAN Shan-ming, JIAO Jian, LI Hong-bin, LIANG Fang-min, LIN Yan, LIANG Long. Variation of Chemi-mechanical Pulping Properties from Several Eucalyptus spp.Woodchips [J]. Chemistry and Industry of Forest Products, 2015, 35(1): 63-69.
[2]	DENG Yong-jun;FANG Gui-gan;HAN Shan-ming;JIAO Jian;LI Hong-bin;LI Ping;LIANG Fang-min;HU Jian-ming. Preparation of Bleached Chemimechanical Pulps from Poplar-wood Processing Residues for Making Munken Paper [J]. , 2009, 29(S1): 262-262.