欢迎访问《林产化学与工业》,

林产化学与工业 ›› 2016, Vol. 36 ›› Issue (3): 23-28.doi: 10.3969/j.issn.0253-2417.2016.03.004

• 研究报告 • 上一篇    下一篇

渗透剂对桉木化学机械法制浆性能的影响

邓拥军1,2,1, 房桂干1, 韩善明1, 焦健1, 李红斌1, 梁芳敏1, 林艳1   

  1. 1. 中国林业科学研究院林产化学工业研究所;生物质化学利用国家工程实验室;国家林业局林产化学工程重点开放性实验室;江苏省生物质能源与材料重点实验室, 江苏 南京 210042;
    2. 中国林业科学研究院林业新技术研究所, 北京 100091
  • 收稿日期:2015-05-26 出版日期:2016-06-25 发布日期:2016-07-07
  • 通讯作者: 房桂干(1966-),男,江苏兴化人,研究员,博士,博士生导师,主要从事制浆造纸清洁高效生产工艺技术及废水处理工程技术;E-mail:Fangguigan@icifp.cn。 E-mail:Fangguigan@icifp.cn
  • 作者简介:邓拥军(1969-),男,湖南江华人,高级工程师,博士,主要从事清洁高效制浆技术研发及工程设计;E-mail:Yongju_deng@126.com
  • 基金资助:
    国家林业局948项目(2014-4-31)

Effects of Penetrating Agent on Properties of Eucalyptus Woodchips Chemi-mechanical Pulping

DENG Yong-jun1,2,1, FANG Gui-gan1, HAN Shan-ming1, JIAO Jian1, LI Hong-bin1, LIANG Fang-min1, LIN Yan1   

  1. 1. Institute of Chemical Industry of Forest Products, CAF;National Engineering Lab. for Biomass Chemical Utilization;Key and Open Lab. of Forest Chemical Engineering, SFA;Key Lab. of Biomass Energy and Material, Jiangsu Province, Nanjing 210042, China;
    2. Research Institute of Forestry New Technology, CAF, Beijing 100091, China
  • Received:2015-05-26 Online:2016-06-25 Published:2016-07-07

摘要: 研究了不同渗透剂对桉木化学机械法制浆性能的影响,结果表明:不同类型的渗透剂对桉木浸渍性能的影响差异较大,其中磺化琥珀酸二辛酯钠盐类渗透剂S4对桉木浸渍性能改善程度最高,渗透剂用量为0.4%时,可以使木片的吸液量和NaOH吸收率分别比对照样提高7.34%和9.97%。渗透剂对桉木化学机械浆的性能影响如下:浸渍段添加0.4%渗透剂S4,制取加拿大游离度(CSF)为300 mL的纸浆,可以使磨浆电耗降低10%以上,浆中的细小组分减少9个百分点以上,纤维束减少46%;纸浆的抗张强度、耐破强度及撕裂强度均有不同程度的提高,可分别提高11.4%、14.3%和15.6%,但对纸浆的白度无明显影响。

关键词: 渗透剂, 桉木, 制浆性能, 化学机械浆

Abstract: The effects of penetrating agent on the properties of eucalyptus woodchips chemi-mechanical pulping were studied. The results showed that the performances of different type of penetrants were quite different in the eucalyptus woodchips chemi-mechanical pulping properties. Among these, sodium diethylhexyl sulfosuccinate penetrant exhibited the best performance on improving the impregnation of eucalyptus woodchips. With the dosage of penetrant of 0.4%, the chemical liquor absorption amount and NaOH absorption rate of wood chips respectively increased by 7.34% and 9.97% respectively, if they were compared with the blank groups. At the Canadian standard freeness (CSF) level of 300 mL, with the addition of 0.4% sodium diethylhexyl sulfosuccinate at the impregnation stage, the refining energy consumption and shives content in pulp were reduced by over 9% and 46%, respectively, if they were compared to the control pulp sample. And the tensile strength, burst strength and tear strength were increased by 11.4%, 14.3% and 15.6%, respectively, without losing brightness.

Key words: penetrant, eucalyptus woodchip, pulping properties, chemi-mechanical pulping

中图分类号: