欢迎访问《林产化学与工业》，
林产化学与工业

林产化学与工业 ›› 2011, Vol. 31 ›› Issue (6): 95-99.

• 研究报告 • 上一篇    下一篇

两步法稀酸水解竹黄(慈竹)生产糠醛的研究

殷艳飞, 房桂干, 邓拥军, 韩善明, 焦健, 刘姗姗, 刘春   

  1. 中国林业科学研究院 林产化学工业研究所; 生物质化学利用国家工程实验室;国家林业局 林产化学工程重点开放性实验室; 江苏省生物质能源与材料重点实验室; 中国林业科学研究院 制浆造纸研究开发中心, 江苏 南京 210042
  • 收稿日期:2010-10-19 修回日期:2011-09-30 出版日期:2011-12-30 发布日期:2011-12-30
  • 通讯作者: 房桂干,博士生导师,研究领域为木质纤维材料的化学利用; E-mail:fangguigan@icifp.cn。

Furfural Production from Bamboo (Sinocalamus affinis) Chippings by a 2-Step Dilute Sulfuric Acid Hydrolysis

YIN Yan-fei, FANG Gui-gan, DENG Yong-jun, HAN Shan-ming, JIAO Jian, LIU Shan-shan, LIU Chun   

  1. Institute of Chemical Industry of Forest Products,CAF; National Engineering Lab.for Biomass Chemical Utilization; Key and Open Lab.on Forest Chemical Engineering,SFA;Key Lab.of Biomass Energy and Material, Jiangsu Province;Pulp and Paper R&D Centre,CAF, Nanjing 210042, China
  • Received:2010-10-19 Revised:2011-09-30 Online:2011-12-30 Published:2011-12-30

PDF (PC)

695

摘要： 以造纸原料剩余物竹黄为原料,对两步法生产糠醛的工艺条件分别进行研究。首先对第一步稀硫酸催化水解竹黄半纤维素的工艺条件进行了研究,考察了反应温度、反应时间、硫酸质量分数和固液比对戊糖收率的影响,采用正交试验法,对试验结果进行直观分析,探讨稀硫酸催化水解半纤维素的最优反应条件;然后对第二步半纤维素水解液生产糠醛的工艺条件进行了初步探讨。结果表明:戊糖收率最高的反应条件为液固比10∶1(mL∶g),温度 115 ℃,反应时间 2.5 h,硫酸质量分数 3.5 %,聚戊糖转化率可达到 72.06 %;在温度 154 ℃,反应时间 6 h,体系水解液中硫酸质量分数 19.34 %,戊糖初始质量分数 4.53 % 的条件下,糠醛收率可达到理论收率的 63.36 %。

关键词: 糠醛, 两步法, 稀酸水解, 戊糖

Abstract: Different hydrolysis conditions were tested for the first hydrolysis step. The variable parameters were studied, such as the reaction temperature, the concentration of dilute sulfuric acid, the liquid-solid ratio and the reaction time. Besides, according to orthogonal experiment to study the optionization conditions of pentose production, visual and variance analysis was made. Hydrolysate for experiments on the second hydrolysis step was produced under these conditions. As a result, at liquid-solid ratio 10∶1(mL∶g), reaction temperature 115 ℃, reaction time 2.5 h, and concentration of sulfuric acid 3.5 %, the optimium pentosan conversion is 72.06 %. At the second step, with a reaction temperature 154 ℃, a reaction time 6 h, a concentration of sulfuric acid 19.34 %, and an initial pentose content 4.53%,the maximum furfural yield can reach 63.36 % of the theoretical yield.

Key words: furfural, 2-step method, dilute sulfuric acid hydrolysis, pentose

中图分类号: 

版权所有 © 中国林业科学研究院林产化学工业研究所　苏ICP备08107184号-3